Best bike fenders / mudguards for fall and winter riding 2024

The basic idea behind a fender / mudguard is to stop water coming off the wheels onto your body: the longer the guards, the greater the coverage and the more protection they offer - full guards also keep a lot of salt-laden winter road spray off your bike. Very narrow guards or those that are too flat or far away from the tire will also reduce protection.

As race-oriented road bikes have become lighter and more sport focused, fittings and/or clearance for ‘proper’ guards has fallen out of favour and many people don’t have the financial wherewithal or inclination for a dedicated winter bike. All is not lost, though.

There are now plenty of options for the ‘close clearance’ bike, from simple clip on and off options that avoid the brake and normal attachment issues, right through to fenders that look like traditional guards but bypass clearance issues through clever design - and plenty in-between.

On the other hand, many makes have noted that riders want all-weather protection and many newer endurance bikes and gravel bikes have increased clearance for wider tires along with include hidden guard mounting points.

The best bike fender /mudguards tested

Full length bike fenders / mudguards

These anodised aluminium fenders / mudguards from Portland Design Works come in at an impressive 446g (as fitted) and they are able - with optional axle tabs - to fit bikes without traditional frame eyelets as well. 

To stop your toes from clashing with the stay end caps, the Full Metal fenders / mudguards use a single stay design that is kept higher on front fender than a double stay type. It made low speed manoeuvring easier, although there was still toe overlap on my bike but that's the bike and not the mudguards fault. 

PDW's full-wrap offering were remarkably easy to fit and setup, and having discrete breakaway clips at both ends which was a nice touch. Once on the bike they were super stiff which stopped any tire buzz, even when rocking the bike from side to side on a steep hill. 

There are three widths available, and these 37mm wide mudguards are able to accommodate up to a 30mm tire. They looked in proportion when using a 28mm tire and there was a good amount of space to the side of the tire.

Along with the silence, the stealthy look from the matt black finish keeps everything pretty discreet. These mudguards are really good and are well worth strong consideration despite the higher price than other options here.

Read more: Portland Design Works Full Metal fenders / mudguards full review

Bontrager's NCS fenders / mudguards have a clever trick up their stays: instead of trimming them to make them fit your bike properly, you adjust the length of the stays by sliding the two parts up or down as necessary, using the built-in clamps to then lock them in place - thus providing maximum coverage without the possibility of annoying extra faff.

With that extra long coverage, our reviewer found that the Bontrager NCS fenders/mudguards offer more protection than many other ‘full-length’ mudguards. The rubber mudflaps at the ends of fenders further add to the length and help reduce road spray for your feet or friends, but these aren’t as long as we see on some other mudgaurd sets.

The Bontrager NCS fenders / mudguards come in a range of sizes: from 18-25mm for old school road bikes and all the way up to 35-45mm for trendy new gravel bikes. The set we had on test was right in the middle, designed for 28-35mm 700c tires - which is typical for winter bikes these days.

There is a mount on the rear fender for a Blendr light (also sold by Bontrager), but user reviews on Trek’s site suggest it’s been a bit fragile for some folks. We didn’t have an accompanying light for this review, so can’t comment directly on its performance - but it’s there if you would like to use it.

Read more: Bontrager NCS fenders / mudguards full review

SKS’s Bluemels Basic fenders / mudguards do a reasonably good job of keeping you dry. Their coverage isn’t as long as some - and our tester did find that you get spray over your feet from the front wheel and anyone following behind will still get a coating.

But that said, you perfectly well attach your own mudflaps to the Bluemels Basic and extend their spray protection that way. It’s simple (and cheap) enough to fashion a set from a few sheets of rubber - and there are even brands which offer funky designs, such as Raw Mudflap.

The construction consists of a sandwich of thin aluminium encased in plastic. It’s not quite as rigid as an all-metal design, but thanks to the sturdy stays, our tester didn’t have any issues with rubbing. But naturally, if you try to cram a wider tire than recommended - or if the clearance between your seatstays is particularly tight - you can still experience issues.

There are fenders / mudguards which do provide more coverage at a similar price - even within SKS’s own range, such as the SKS Longboards. If wet weather protection is most important to you, the choice between the two is pretty obvious. But there will be those who prefer the tidier looks of the Bluemels Basics.

Other rivals include Bontrager with their NCS fenders / mudguards that are longer and easier to fit, but more expensive and the Portland Design Works Full Metal Fenders which are absolutely brilliant but are more than double the price of the Bluemels Basics.

Read more: SKS Bluemels Basic fenders / mudguards full review

Clip-on bike fenders / mudguards

The SKS Raceblade Pro XL Stealth Series guards tip the scales at 380 grams, when weighed with the rubber attachment straps. They are compatible with 700c wheels and tire widths of up to 32mm. The front fender provides a coverage of 565mm and the rear 730mm.

Testing these on both traditional round tubes and aero-profiled carbon frames, the SKS Raceblade Pro XL Stealth Series fits securely and is easy to make micro-adjustments with, to ensure that the clearances between the frame and tires are sufficient. The fenders are also very quick to remove for rides on dry days. 

Naturally, you (and the people behind you) get less protection than with a set of full-length fenders. But as a lightweight and quick-to-remove set (perfect for bikes without mudguard eyelets), the SKS Raceblade Pro XL Stealth Series do a respectable job, keeping the worst of the muck off and leaving you warmer and more comfortable. 

This, combined with the minimally fussy fitting, makes the SKS Raceblade Pro XL Stealth Series better than any of its clip-on competitors - which generally either don’t fit as well or don’t offer as good protection. Value-wise they are a bit more expensive than the competition, but they are also readily available for less online.

Read more: SKS Raceblade Pro XL Stealth Series full review

The LifeLine narrow mudguards attach to the seatstays and the fork legs some way up them, so they'll work without eyelets and on both disc brake and rim brake bikes. 

Their shortish coverage means that they don't need to squeeze through brake bridges and fork crowns too, so they are easy to fit. That does mean that you don't get complete coverage and wheel spray can be an issue, particularly from the front wheel.

They're easy to adjust if they do rub, just by pushing the rubber mounts up or down the bike's tubes, so you don't need a spanner. If you do want to make more significant adjustments, the quality bolts for the stays make that easy though.

Sold by Wiggle and Chain Reaction Cycles as well as other online outlets, the LifeLine mudguards don't cost a lot more than more basic options, but give better coverage and should be more durable.

Read more: LifeLine Narrow Road Clip-On fenders / mudguards full review

The Flinger Race Pro guards are an easy to install set of clip-on mudguards that fit securely to road bikes which that doesn't have specific eyelets for mounting 'guards.

They feel light on the bike relative to some other fenders / mudguards and, with excellent coverage, the Race Pros keep you, your mates and your bike much dryer than going bare or using an 'asssaver' style fender.

In the box comes a rear guard with stays attached, a rear guard extension, adjustable stays with an attachment foot, a short bracket and four rubber attachment strips. The attachment strips wrap around the seat and chain stays then link onto a hook in the bracket that holds the guard in place.

The guard is a tight squeeze, and so in the case of our tester, he couldn't fit the entire product to his road bike. That said, it was functional even with one part of the guards missing from the bike.

Read more: Flinger Race Pro fender / mudguard full review

What to look for in a bike fender / mudguard

Bicycle fender / mudguard fitting

Having a plastic cover close to your tire means there is a chance of additional noise as flopping guards can rub on the side of the tire or bounce up and down on top of it. No one wants to ride a noisy bike, so the quality and security of the fittings is just as important as the length and coverage.

Ease of bicycle fender / mudguard fitting

As the guards will be going on a bike that is also ridden ‘sans fender’, the ease of fitting and removal is important, as is the speed and simplicity. We like a guard set to be easy to keep together off the bike. Too many parts to get lost or slide under the fridge are never a good thing.

How we test

First and foremost comes the hard miles through inclement weather and the extent  to which the 'guards protect ourselves, our bikes, and those riding with us from road surface spray. Alongside the functional performance, we consider the ease of fitment, durability, sizes offered and, of course, the price and whether the fenders represent value for money.