Many wheel and tyre companies are pushing tubeless tyres and wheels at the moment. For those who don’t know, tubeless tyres are similar to a clincher, but form an air tight seal against the rim and contain sealant, instead of an inner tube.
>>> Buyer's guide to road bike wheels
But what happens when you puncture a tubeless road tyre? Do they actually work? To test this I took an American Classic road tubeless wheel, fitted with a Bontrager 25mm tubless tyre and sealant and pumped them to 80 psi.
American Classic Road Tubeless with 25mm Bontrager R3 tyres
Having put several hundred kilometres on these wheels and tyres without incident, I decided to force the issue to see how effective the puncture protection is. The first test I did was to roll the tyre over a line of drawing pins, or thumb tacks if you are American.
Pulling them out resulted in the holes sealing almost immediately. I should also note that puncturing the side walls with the tacks (not shown in the video) appeared to seal just as easily too.
Drawing pins in the tyre
Having seen off multiple pins with ease, I next opted for a hammer and nail. To my surprise, the large hole was sealed in around 20 seconds and would have probably been quicker if I had been riding and the wheel spinning. Although there was some loss of pressure, the tyre was still perfectly rideable and you could always top it up. I repeated this experiment several times, with the same result.
>>> Buyer's guide to road bike tyres
The tyres even saw off a nail!
So there you have it, the tyre seals very effectively. I was so impressed with these tyres that after making this video I went on to use these exact tyres in the epic 254km Rapha Manchester to London Ride, despite the fact I had previously driven nails into them! They performed flawlessly, with no punctures and being tubeless meant I could run them at lower pressure (65-70 psi) for substantially more comfort.
>>> Click here for our buyer's guide to road bike wheels
If you are unfortunate enough to get a larger puncture, you can place a piece of rubber in the tyre and insert a standard inner tube. The only real downside is that fitting a tubeless tyre can be harder than a standard clincher, especially with certain rim/tyre combinations. I really like these Bontrager R3 tyres, but it was a struggle getting them onto these particular rims.
Oliver Bridgewood - no, Doctor Oliver Bridgewood - is a PhD Chemist who discovered a love of cycling. He enjoys racing time trials, hill climbs, road races and criteriums. During his time at Cycling Weekly, he worked predominantly within the tech team, also utilising his science background to produce insightful fitness articles, before moving to an entirely video-focused role heading up the Cycling Weekly YouTube channel, where his feature-length documentary 'Project 49' was his crowning glory.
7 steps you mustn't forget when preparing your bike for spring
‘To find out post-accident that I would be in a wheelchair… I felt like my life was over’ - How adaptive bikes give spinal cord injury survivors their lives back
