Playlist 20 videos

What are cyclocross bikes designed for?

A “pure” cyclocross bike is designed for cyclocross races, although as we’ll see below many cyclocross – or ‘cross or CX – bikes are specified so that they can be used for activities other than racing.

A cyclocross race takes place on a closed off-road circuit which is predominantly on grass, tracks or sand and will contain obstacles such as low barriers, sand pits, steps or steep banks. Usually some of these obstacles will require dismounting from said cyclocross bike, carrying it, then remounting – all of which require specific techniques. Most races last less than an hour.

>>> Guide to cyclocross skills

Cyclocross races typically take place in the winter months, so mud is a major feature, with the bikes churning up the circuit. However, there are more summer races too, such as the London Summer Cyclocross Series which takes place in July and August.

As well as amateur races, there are professional cyclocross competitions, which take place mainly in Holland and Belgium and are keenly followed, drawing large crowds. The elite riders tend to be cyclocross specialists racing for cyclocross-specific teams although a few road racing pros also participate.

We’ve got more advice on how to get into cyclocross racing here, written by Ian Field, the current and four-time British champion.

So what’s different about a cyclocross bike?

A cyclocross bike is built a bit differently from a standard road bike – with tweaks made to create a machine that’s more suited to off-road riding. We’ll go through the different features below, but the overall appearance is more chunky and usually there’s less of a height difference between the saddle and the bars. Lower priced cyclocross bikes are typically made of aluminium while the pricier models have carbon frames. The majority will come with a carbon fork.

Over the past few years, brands have responded to the call for mixed terrain bikes created with more relaxed riding in mind. The resulting creations are gravel and adventure bikes, which share wide tyres and often disc brakes with ‘cross bikes, but are usually a little closer to road bikes so they ride well on tarmac. Greater provision is also made for all-day adventures, with pannier racks and bottle cages – the former never featuring on a race focused cyclocross bike, and the latter rarely a consideration.

The best cyclocross bikes: six top picks

To help you out of you’re on the lookout for a cyclocross bike, we’ve highlighted some of our favourite models. Read further down the page for an explanation of what sets cyclocross bikes apart, and what to look for.

Ridley X-Trail Carbon SRAM Force1 HDB cyclocross bike

Ridley X-Trail Carbon SRAM Force1 HDB cyclocross bike

Ridley X-Trail Carbon SRAM Force1 HDB cyclocross bike

Read more: Ridley X-Trail Carbon SRAM Force1 HDB review

Designed to suit a range of rider needs, the X-Trail is a versatile cyclocross bike that’s nimble enough to suit the road, whilst still offering all that’s needed for fun on the trails.

It’s a great bike for those who want a multi-discilplined machine, but the lack of specificity won’t suit those after an all-out cyclocross race machine.

Buy now: Ridley X-Trail range at Ridley bikes

Santa Cruz Stigmata cyclocross bike

Santa Cruz Stigmata cyclocross bike

Santa Cruz Stigmata cyclocross bike

Read more: Santa Cruz Stigmata cyclocross bike

A comfortable cyclocross bike that offers excellent handling, the Stigmata come from a brand that is highly regarded in the off-road world.

The Maxxis Rambler TR tyres roll well, even at low pressures – though serious cyclocross riders might favour a single chainring.

Buy now: Santa Cruz Stigmata cyclocross bike for £3,199 at Evans Cycles 

Cannondale SuperX cyclocross bike

Cannondale SuperX cyclocross bike

Cannondale SuperX cyclocross bike

Read more: Cannonade SuperX 105 cyclocross bike review

The Cannonade SuperX frame has been redesigned to feature some of the elements you’d find on the popular brand’s mountain bikes – namely Asymetric Integration which sees extra clearance provided at the rear wheel.

We thought the handling was excellent, but observed that the spec for the price was lower than you might find elsewhere. A good option if you prioritise innovative frame design over value for money or top spec.

Buy now: Cannondale SuperX 105 Cyclocross bike for £2,599.99 at Evans Cycles

Trek Boone cyclocross bike

Trek Boone 5 cyclocross bike

Trek Boone 5 cyclocross bike

Read more: Trek Boone 5 cyclocross bike review 

The flagship cyclocross bike model from Trek, the Boone features the brand’s IsoSpeed decoupler technology at the seat tube junction. This really helped to even out bumps along the way, and the build comes with tubeless ready wheels and tyres.

Buy now: Trek Boone 5 cyclocross bike from Evans Cycles for £2,200

Specialized CruX Expert X1 cyclocross bike

Specialized CruX Expert X1 cyclocross bike

Specialized CruX Expert X1 cyclocross bike

Read more: Specialized CruX Expert X1 cyclocross bike reviewed

A very modern take on the cyclocross genre, this top end CruX features a single chainset, thru axles front and rear as well as internal cable routing.

This top end build comes in with a price tag to match, but the same nimble frame can be found dressed with more entry level spec.

Buy now: Specialized CruX Expert X1 cyclocross bike for £3,200 from Leisure Lakes Bikes (see the Specialised CruX E5 model for £1,250 at Evans Cycles here)

Scott Addict CX10 cyclocross bike

Scott Addict CX10 cyclocross bike

Scott Addict CX10 cyclocross bike

Read more: Scott Addict CX10 cyclocross bike reviewed

A super light race machine, the Addict CX10 has some  clever features, including flattened sections on the frame to make for easier bike shouldering during running portions of the race. We found the frame to be hugely responsive and liked the simplicity of the single chainring.

This is a well specced, top end bike – and admittedly that does show on the overall cost.

Buy now: Scott Addict CX10 cyclocross bike from Evans Cycles for £4,999 from Evans Cycles and Scott Addict CX20 cyclocross bike for £2,899 from Evans Cycles

Tyres on cyclocross bikes

To ensure grip in off-road conditions, a cyclocross bike will be fitted with wide tyres. The UCI, world cycling’s governing body, uses a formula which usually limits tyre width to 33mm for competitions, but many cyclocross bikes are sold with 35mm tyres for extra grip and stability.

Tread patterns differ dependent on the conditions on the course. Hard or sandy conditions are usually tackled on file treaded tyres, as low rolling resistance is more important than grip. Once it starts to get wet or muddy, tyres with knobs come into their own, with the knob size and tread pattern increasing as the conditions become more sketchy to add more grip and mud-shedding capability.

cyclocross bike tyres

A more aggressive tread pattern on cyclocross bike tyres is good for muddy conditions

Many cross bikes come with clincher tyres, although professionals and more serious amateurs typically ride on treaded tubulars which can be run at lower pressures for more grip. Tubeless clincher tyres are also beginning to appear, which have the advantages of tubulars but are easier to set up and provide puncture resistance too.

Tyre pressure is critical to off-road handling with pros often riding tyres at below 30psi. This is easier with tubular or tubeless clincher tyres, neither of which is susceptible to pinch flats. For a standard clincher set-up a pressure nearer 40psi provides a bit more protection from bottoming out the tyre on the rim, which can cause pinch flats.

Clearance on a cyclocross bike

Mud is almost inevitable in cross races and cyclocross bikes are built with plenty of clearance between the tyres and the frame so that the wheels keep turning even when it collects on the bike during the race. This is evident around the forks, the chainstays and the seatstays and there’s also more space between the rear tyre and the seat tube and bottom bracket than on a road bike.

Brakes on a cyclocross bike

In 2013 the UCI permitted the use of disc brakes on cyclocross bikes used in competition. Now the majority of cross bikes are sold with discs. Lower end bikes will have mechanical disc brakes, although full-hydraulic systems are becoming more and more prevalent as component manufacturers offer more options. It’s also possible to use a converter like Hope’s V-Twin, which sits below the stem to allow the use of hydraulic disc brakes with cable-actuated levers.

Hydraulic disc brakes and thru axle front wheels are becoming common on cyclocross bikes

Previously, cyclocross bikes used cantilever rim brakes for their mud clearance. Many cyclocross pros still use them in competition and a few cyclocross bikes and frames are sold with cantilever brakes or with additional mounts for cantilevers as well as disc brakes.

Specialized Crux Elite

Cantilever rim brakes are becoming a rare sight on new cyclocross bikes

Disc brakes provide quicker and more consistent braking and it is easier to modulate them to get the correct amount of stopping power than for cantilevers. To handle the stresses on the wheels from disc brakes, cyclocross bikes are increasingly being specified with thru axles. These are borrowed from mountain bikes and result in a more rigid wheel to frame connection than a quick release. They may be used at the front only or for both axles. Rear axle spacing is usually 135mm but bikes with 142mm axles are appearing too. Thru axles also help improve accuracy of disc placement in the brake calipers.

Gearing on a cyclocross bike

A typical cyclocross bike designed for competition will come with a 46/36t double chainset and a fairly wide range cassette, which may be switched out dependent on the circuit and conditions. Although this gives quite a low top ratio for road riding, which would result in spinning-out, it should give enough top-end speed for most cyclocross courses. Less cross-specific bikes may be kitted out with a compact double with 50/34t chainrings.

>>> Road bike groupsets guide

Another trend is the increasing use of SRAM’s 1x (pronounced One-By) transmission. This dispenses with the second chainring in favour of a much wider spread of sprockets in the cassette, so that the number of gears drops from 22 to 11 but the available range remains similar. The chainring has alternating wide and narrow teeth to mesh better with the wide and narrow links in the chain, helping to clear mud and prevent chain drop. The rear derailleur too has a unique design with a clutch to prevent chain slap.

Boardman CXR/9.4 Di2 cyclocross bike

Another feature of many cyclocross bikes is the routing of the gear and rear brake cables, which are typically fully enclosed and run along the top of the top tube to keep the mud at bay, although internal and down tube routing is also found. This helps to protect the cables in poor conditions and makes it more comfortable when carrying the bike on your shoulder during a race.

Geometry of a cyclocross bike

The more subtle difference from a road bike is in frame geometry. There’s typically a longer wheelbase for increased stability off-road and to build in the necessary clearances. The frame angles are slightly less acute which also helps with handling and there’s a shorter top tube. This results in a more upright riding position than on a road bike, which along with the more level bars and saddle allow the rider to shift their weight around more easily to tackle obstacles and to control traction.

A cyclocross bike will have a longer wheelbase for stability and wheel clearance

A cyclocross bike will have a longer wheelbase for stability and wheel clearance

Since there are usually unrideable obstacles on cross race courses, competitors will dismount and carry their bike before remounting. This may be easier with a slightly lower saddle than you would ride on a road bike. Cyclocross frames typically have a flattened top tube to make running with the bike on your shoulder a bit more comfortable.

Pedals and shoes on cyclocross bikes

Quick mounting and dismounting and running in mud and sand with your bike require different pedals and shoes from sitting on a road bike. Cyclocross bikes are usually set up with clipless mountain bike pedals and riders use shoes which will take two bolt style cleats and which have grips and sometimes studs. These may be mountain bike shoes but there are an increasing number of cyclocross-specific shoes becoming available too.

Cyclocross bikes use MTB type clipless pedals provide two-sided entry and mud clearance

MTB clipless pedals – it’s not so clear which is left and which is right

And what other things are cyclocross bikes good for?

Being robust, ruggedized and with lots of clearance and stability, cyclocross bikes are increasingly popular for other activities. They make good commuter bikes and many come with mounts for mudguards and racks, so that they can also be used as winter bikes or for touring. Many top-level cyclocross bikes used to come without bottle cage mounts, since there isn’t any need to drink during an hour-long race, but cage bolts are now pretty much the norm.

>>> My first cyclocross race

The place of cyclocross bikes as do-it-all road bikes which can also tackle bridlepaths and off-road sections is gradually being usurped by the newer category of adventure road and gravel bikes, which have many similarities but more on-road oomph and off-road stability. Many manufacturers are now adding such adventure road and gravel bikes to their ranges.

  • labradorofperception

    no Giant TCX SLR2 – full 105, spires discs and less than a grand. Capable of getting fat men in club kit aruund the Dog and the Monkey at Cannock……

  • dsa

    dsadasdas dsa das