Cycling and lower back pain

Given how hard your legs work on the bike, it’s natural to assume that when an overuse injury strikes, it’s your knees that will be most vulnerable. Surprisingly however, the research says otherwise. It seems the biggest culprit is not knee pain in cyclists – it’s lower back pain.

When Norwegian scientists investigated 116 professional road cyclists and looked at the types of overuse injuries suffered over the previous year, some startling facts emerged: 94 per cent of the cyclists had suffered some kind of overuse injury during that period.

Of these, 45 per cent were to the lower back with only 23 per cent to the knees; 58 per cent of all the cyclists had experienced lower-back pain in the previous 12 months, and 41 per cent of all cyclists had sought medical attention for it.

What’s surprising about these results is that cycling is a low-impact sport and is often actually recommended for back pain sufferers. So why is lower-back pain so common among cyclists who spend long hours in the saddle?

Don’t blame your bike

Your bike fit does need to be right for you, but it’s not always the cause of lower back pain

Correct bike set-up is crucial for back health, but in the study on elite cyclists above, they were supervised by national coaches with access to advanced facilities, so incorrect bike geometry wouldn’t have been a factor. What else could be going on? Well, some research has shown that muscle fatigue may play a role.

In one study, scientists demonstrated that when cyclists pedalled to exhaustion, their hamstrings (rear thigh) and calf muscles became progressively more fatigued (as expected). What was surprising, was that this fatigue seemed to produce undesirable changes in muscle movement patterns, which then affected the back – specifically, the degree to which the cyclists were bent forward in the lumbar region and also how far their knees were splayed out.

In a nutshell, the more tired these cyclists became in their legs, the worse their spinal posture became.

Read more like this

paris-roubaix saddle height measure

How to set your saddle height

Setting the right saddle height: 1. Measure your inside leg 2. Simulate your saddle contact point off the bike using…

Add in exercises to strengthen the surrounding muscles to avoid lower back pain[/caption]

The evidence above points to the fact that cyclists need to be strong in the lower back and core in order to avoid suffering the results of impaired movement patterns.

The video above demonstrates three key exercises, as prescribed by pro team chiropractor Matt Rabin, which we’ve also describe for you here:

The founder

  1. Works the entire posterior chain and should be completed before you ride to activate the muscles
  2. Start with your feet hip width apart, in an upright stance with your hips over your ankles and shoulders over your hips
  3. Rock back so your weight is on your heels, and unlock your knees
  4. Bring your hips back and tilt your body forwards, keeping your chest straight
  5. Pace your hands in front of you, with your finger tips together
  6. Reach your hands forwards, and over your head
  7. Reach up, pushing your hips back
  8. You should feel a burn through your upper and lower back, glutes and hamstrings
  9. Hold for 10 seconds, three times

The woodpecker

  1. This exercise works the deep gluteal muscle fibres, and it’s good to do before you ride to activate them in advance
  2. Start with legs together and step your right leg forwards – you should be able to look down and still see your shin
  3. Make sure your hips are square
  4. Reach your arms in front of you, and clasp them together
  5. Pivot at the hip, keeping your lower body and upper body still
  6. Reach as far forward as you can – push your right heel into the floor and pull your hips back
  7. You should feel a burn in the glutes – hold for 10 seconds then repeat 2-3 times each side

The plank

  1. Works to engage the muscles often called the core, do it before your ride to get the muscles activated
  2. Come onto your elbows and toes, feet hip width apart
  3. Keep your head upright, and your eyes pointing towards the floor about 10cm in front of you
  4. Keep your hips in a straight line – no sagging or raising up
  5. Hold for a minute

Addressing your posture

Make sure you’ve got your desk set up sorted to avoid lower back pain

Whilst the pro cyclists included in the study were likely to create most of the damage on the bike, recreational cyclist must also bear in mind that many of their seated hours are not spent upon a saddle.

Slumping at a desk whilst at work can play havoc with your back, and the resulting imbalances can then cause issues on the bike.

If you spend many of your working hours sitting – at a desk or in a car – try to optimise your set up so that you maintain a straight position, without slumping or rotation. We’ve got a detailed video guide on exactly how to improve your desk posture here. 

Selecting correct frame geometry

Though lower back pain often arises as a result of weakness or improper movement as a result of fatigue, it is a good idea to assess your bike fit too as this can be a contributing factor.

Choosing a bike frame with the right geometry and ensuring the correct riding position on the bike are both crucial to minimising unwanted loading on your lower back as well as your knees, shoulders and neck.

Before you look to adjust your bike fit on your steed – make sure you’re riding a frame with geometry that suits you. All the different parameters shown below will affect the way the bike handles, but A, B and H (seat tube, top tube and head tube length) need to be correctly matched to your body dimensions.

A long top tube, or reach made long by a long stem, can increase the chance of lower back pain. So too can an overly large drop from the saddle to the handlebar – often create by a short head tube or having all your spacers below the stem, creating a low stack.

A Seat tube length
B Top tube length
C Head tube angle
D Seat tube angle
E Fork offset
F Rear centre
G Wheelbase
H Head tube length

Optimum bike set-up 
to minimise injury risk

If you’re happy that you’re sitting aboard a frame with geometry that suits you, you need to get set up on it correctly. Here’s a look at the key elements to look at:

Saddle height This should be positioned so that when the pedal is at the bottom of the stroke and the ball of your foot is on the pedal, your knee should have a slight bend in it. Hips shouldn’t move sideways during crank 
rotation and you shouldn’t have to stretch at the bottom of the pedal stroke.

Saddle angle This should be in a horizontal position, parallel with the floor when viewed side on (but sometimes a very slight downwards tilt can be helpful for those who experience a lot of pressure in the perineum area).

Forwards/backwards position of the saddle With the pedals adjusted so that they are at the three o’clock and nine o’clock positions, a vertical line dropped from just behind the kneecap on the outside of the forward knee should pass through the axle of the pedal.

>>> How to set your saddle height

Handlebar position Handlebars should be adjusted so that you neither have to stretch to reach them, or feel confined by having them too close to your body. You should be able to comfortably reach the bars from an upright position and your elbows should be slightly bent when resting on them.

>>> How to set your handlebar height

In addition, you can also select your desired gear to match the terrain, which means 
that you can avoid loading your 
muscles and joints with excessive force, keeping the cranks spinning rather than pushing a big gear.

The icing on the cake is that because your feet are fixed in place, spinning the cranks requires very 
little co-ordination, which also 
reduces the risk of injury due to poor technique. Still, despite all these advantages, cyclists can, and regularly do, suffer overuse injuries, particularly when spending long, hard hours in the saddle – for example, when preparing for a big sportive.

  • noel crowley

    Fosbury and Anquetil made important technique changes in their sports which improved performance. Fosbury changed his bodies center of gravity as it moved over the high jump bar. Anquetil changed by about 45 deg the angle at which he applied his peak torque to the pedalling circle, this resulted in not only the ability to apply maximal torque through TDC but also a stress free lower back which is the root cause of cycling’s lower back problems.

  • James Broughton

    Hi again. I’m not an advocate of chiropractic treatment. I was told by my GP that I was just prone to costochondritis and that I should take ibuprofen, but that only offered temporary relief. I thought the problem must be musculoskeletal and sort other treatments. I am considering going to a sports physiotherapist instead. I think cycling puts a lot of pressure on my shoulders and thoracic spine. My rhumboids are always full of knots. I’m doing a few exercises to strengthen them. If you or anyone else has some advice I would appreciate it. Thanks.

  • Cam Just

    YAY Anecdotes are proof! lol

    please show me the double blind scientific studies proving ‘subluxation’ is anything other than BS. keep in my chiropractic medicine was started by a know BS artist and scammer, and hes not improved its image one bit since then

  • James Broughton

    And therefore, you might not believe that I actually went to a chiropractor and would be more inclined to believe what I said when I said I went to a chiropractor?

    Sorry, in all seriousness, I had a bad back and didn’t know who to go to to get it fixed. A friend, who injured himself a week before an iron man competition, went to a local chiropractor who enabled him to compete, and thus recommended him. Of course, you should never trust a triathlete.

  • Cam Just

    Its hard to belive anything someone says when they say they also go to a quackcopractor.

  • London Sparrow

    This does seem to assume that everyone uses a road bike.

  • The use of KOPS (knee over pedal spindle) is old school track positioning. There is no basis for this type of setup other than “that’s the way we’ve always done it”. KOPS is one of the reasons your back hurts. It places you too far forward making your back hold up your weight vs your core.

  • Martin Fisher

    This is a frustrating article to read. Lots of fascinating information about how bike set-up is not always the issue and then lots of advice on how to set your bike up…

    It says the conclusion is that “impaired motor control patterns in the lumbar region that led to poor movement patterns, specifically excessive flexion, resulting in lower back pain” but what is the solution to that? I’m very keen to hear even the suggested solutions.