More and more road bikes are coming with tubeless-ready wheels and tyres, although they are usually supplied with inner tubes fitted to make shipping, storage and handling easier. And many wheelsets sold aftermarket are now tubeless ready.
If you want to go tubeless, it’s important to start with tubeless-ready wheels, as the rim diameter and rim bed shape are designed for tubeless tyres. Try to use a standard rim and there’s a risk of the tyre blowing off. If this happens at home you’ll end up with sealant all over the ceiling, but out on the road it could be very dangerous.
Some tubeless ready wheels need the rim taped before you can start the process of fitting the tyre, but most will either come pre-taped like Hunt’s wheels or with a sealed rim bed, like Fulcrum’s Two Way Fit. You can buy tubeless conversion kits from brands like Stan’s No Tubes.
It can be very difficult to get some tubeless tyres onto some rims. Using washing up liquid helps, although it can still be a struggle. Using tyre levers to fit the tyre can damage the bead, although you may need to do so as a last resort. Just be careful, as a damaged bead will stop the tyre from sealing properly.
You can buy kits with everything you need to go tubeless
Although we’ve recommended using a CO2 cartridge to inflate the tyre, some wheel-tyre combinations can be inflated just using a track pump. It’s worth a try although it can take a lot of vigorous pumping. Any you can also buy reservoir pumps where you pump air into a chamber in the pump and release a large volume into the tyre very quickly. This tends to seat the tyre beads more efficiently than a track pump, although reservoir pumps are expensive.
Unfortunately, not all tubeless tyres work with all tubeless wheels. Some will just not seat and there’s no way of telling if it’s going to be a problem except trying it out. But it’s well worth giving it a try, as the lower pressure which you can run without the risk of pinch flats adds comfort and grip.
An air reservoir or reservoir pump can make seating a tubeless tyre a lot easier
And not having to worry so much about punctures is great. The sealant will deal with most thorns and flints that would stop you in your tracks if you were running tubes. But it’s still a good idea to carry a spare tube and a set of tyre levers and a pump or inflator, just in case you get a large hole or a sidewall gash which the sealant can’t deal with.
Thank you for reading 20 articles this month* Join now for unlimited access
Paul started writing for Cycling Weekly in 2015, covering cycling tech, new bikes and product testing. Since then, he’s reviewed hundreds of bikes and thousands of other pieces of cycling equipment for the magazine and the Cycling Weekly website.
He’s been cycling for a lot longer than that though and his travels by bike have taken him all around Europe and to California. He’s been riding gravel since before gravel bikes existed too, riding a cyclocross bike through the Chilterns and along the South Downs.
National Cycling League announces 2024 season hiatus citing 'current economic challenges in domestic and global cycling industry'
Welsh Grand Départ for first ever Tour of Britain Women, British Cycling confirms
